How to Make Fiberglass Life Size Animals Statue Sculpture Monument | Blue Line Fiberglass

Garden Playground Equipment
February 14, 2018
FIBERGLASS ROOF PANELS
FIBERGLASS ROOF PANELS
March 5, 2018
Show all

How to Make Fiberglass Life Size Animals Statue Sculpture Monument | Blue Line Fiberglass

Life Size Animals Sculpture Statue Monument in Pakistan Karachi Lahore Islamabad Blue Line Fiberglass

Blue Line Fiberglass Sculpture offers many benefits over other such structures. It’s lightweight, that’s why it can be transported very easily from one place to other and shipped cost effectively. It’s also very tough and can resist the environmental hazards if it can placed outdoors. Making a fiberglass sculpture is a time-taking task, it’s also very labor-intensive procedure, but it is an outstanding way to create works of art that will last for years to come.

How to make Fiberglass Figures Efficiently:

To produce a fiberglass figure, you need to have the correct tools and substance.  The steps in making fiberglass sculpture need to have proficiency without any problems. In making your own fiberglass sculpture, the first thing you need to achieve is to gather up your idea and a reference image of any actual piece from all the angles.

For making a fiberglass sculpture, an artist not necessary have to purchase fancy carving tools or knife that is used on stone or other carving. He/She needs only the following:

  • Fiberglass Cloth
  • Steel Wire
  • Wire Cutters and Plastic Sheeting
  • Utility Cutters
  • Fiberglass Resin and Hardener
  • Sandpaper
  • Damp Cloth

Use the fiberglass cloth overlooking the first shape. If your figure needs to be cut in part, you can work using tinny wire-meshes that are bent into the correct shape.

Once you have the basic large shape of foam properly proportioned, cut as several pieces as needed to whole and block out the rest of the basic figure. Make sure to have more foam in the right areas, so when you cut and make shape of the foam, you don’t need to add more to achieve the ruined part.

Mix the resin and hardener properly. Make sure to mix in a well-ventilated area to avoid respiratory problems. Saw off large portion of fiberglass that is not necessarily needed. Slide the knife across the fiberglass then add particles of foam off until the shape is leveled equally. Dip the fiberglass cloth inside the resin mixture. Then place the cloth on the structure on the right position. Avoid the bubbles then continue to wet and place the pieces of the cloth until the full form is covered.

Lastly sanding to smooth out the parts, as the knife has designed the shape correctly. When you are using a sand paper, make sure to move it in a circular motion for best results. If it stayed on a same area for a long time, a flat spot or hollow may become a problem. Also, the chemical material will melt from the friction between the sander and the fiberglass. Manually sanding is recommended to achieve perfect sanding. Use 60 grit sand papers for best sanding.

Some other fiberglass products we offer are: Fiberglass Shades, Fiberglass Canopy, Fiberglass Doom, Fiberglass Dustbins Pots & Planters, Fiberglass life size Animals Sculpture Statue Monument , Portable Toilet, Porta Cabin & Guard Room, Fiberglass Playground Products, Outdoor Garden & School Furniture – Bench & Chairs, & Other Products

FIBERGLASS SCLUPTURE WE OFFER

Visit our Photo Gallery for more products we offer

Leave a Reply

Your email address will not be published. Required fields are marked *